1. Manuals
  2. Brands
  3. Power Craft Manuals
  4. Power Tool
  5. Power Craft PRT-150
  6. User manual

Power Craft PRT-150 User Manual

Router table
Hide thumbs

Advertisement

Table of Contents

If you are requested by the manufacturer to return the item for
repair please complete the enclosed section and send it together
with your product and your receipt (proof of purchase) to the
service address shown below.
Name:
Address:
Contact Telephone No.:
E-mail:
Location of purchase:
Fault Description:
In order to deal with your enquiry as quickly and efficiently as possible, we ask you to send your
enquiry by email (technical@omegawolf.co.uk). Do not forget to include your name, address and a
daytime telephone number.
Alternatively, you can contact our freephone service hot-line on the number given below.
Office hours are as follows:
Mon - Fri: 8 am - 6 pm, Sat: 10 am - 2 pm, Sun: 10 am - 4 pm
UK / NORTHERN IRELAND HELPLINE:
0870 7323023
REPUBLIC OF IRELAND HELPLINE:
1800 481005
WEB SUPPORT:
www.omegawolf.com/powercraft
Omega, Interex House, Prospect Close, Lowmoor Business Park
NG17 7LF Kirkby In Ashfield, England
Replacements or repairs under guarantee regulations are free of charge.

ROUTER TABLE

PRT-150
GB/IRE-0706-08
User Guide & Warranty
ROUTER TABLE
Router not included
After Sales Support
Now you have purchased a Power Craft
product you can rest assured in the
knowledge that as well as your 3 year
parts and labour warranty you have
the added peace of mind of dedicated
helplines and web support.
AFTER SALES SUPPORT
UK / N.IRELAND HELPLINE NO
0870 7323023
REP . IRELAND HELPLINE NO
1800 481005
WEB SUPPORT
www.omegawolf.com/powercraft
MODEL NUMBER: PRT-150

Advertisement

Table of Contents
loading

Related Manuals for Power Craft Power Craft PRT-150

Summary of Contents for Power Craft Power Craft PRT-150

  • Page 1: Router Table

    GB/IRE-0706-08 ROUTER TABLE Router not included AFTER SALES SUPPORT UK / N.IRELAND HELPLINE NO 0870 7323023 REP . IRELAND HELPLINE NO 1800 481005 WEB SUPPORT www.omegawolf.com/powercraft...

  • Page 2: Warranty

    Introduction Machine specifications Safety instructions - General safety instructions - Additional safety instructions Assembly - Assembling the router table - Mounting the router Operation Maintenance Exploded view Warranty Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005 Web support: www.omegawolf.com/powercraft...

  • Page 3: Exploded View

    This Router Table will suit woodworking enthusiasts and those new to the craft of routing. It is packed with features to maximise the versatility of your router. It allows the router to be inverted and used as a shaper for making moldings, and working on small pieces.

  • Page 4: Machine Specifications

    855 x 330 mm Extension wing size 200 x 330 mm Max router base plate diameter 155 mm Weight 6 kg Product information Philips head Hex head bolt Allen hex head Coach bolt screw bolt Flat washer Big flat was-...

  • Page 5: Operation

    Dust extraction Fig.17 The router table is provided with a dust extraction facility, where a vacuum extractor may be connected to the outlet at the rear of the table. Note however, that this does not preclude the user from wearing a face mask to prevent the inhalation of dust particles.
  • Page 6 Installing bits To install bits whilst the router is situated in the table will require the router to be lowered fully. Select desired bit and install. Fit the table insert closest to the size of the bit, ensure the bit does not touch the insert.

  • Page 7: Safety Instructions

    (Fig. 14) • Place the router in position on the underside of the table as central as possible. Insert two coach bolts into holes marked “C” (Fig. 4) from the table top, now underneath (Fig. 15).
  • Page 8 Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005 Web support: www.omegawolf.com/powercraft Model Number: PRT-150 Assembly This router table is supplied with extra extensions to improve the control on the work piece. • Place the extensions on both sides as indicated in the figure.
  • Page 9 Assembly • Insert two coach bolt (M6X25) into the holes on the top of guide for fence pressure pad (Fig. 6). • Put the guide for fence pressure pad on the top of fence, and align two holes with the two holes on the fence, then insert two bolts (M6X25) into the holes, and secure in position with nuts (Fig.
  • Page 10 Make sure that the router bit is properly positioned and clamped in the router before making any cuts. • Do not use the router table as a workbench or work surface. Doing so may damage it, causing it to be unsafe to use. A workbench should be used for this purpose.
  • Page 11 Safety instructions • Always make sure that work surface of the router table is clean and free from dust, chips, and foreign particles that can interfere with the cut you are going to make. The use of a wet/dry vac or vacuum equipment is recommended.
  • Page 12 Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005 Web support: www.omegawolf.com/powercraft Model Number: PRT-150 Assembly Assembling the router table Fig. 2 Fig. 3 Fig.4 Fig.5 Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005 Web support: www.omegawolf.com/powercraft...

Table of Contents