Operation; How To Turn On And Turn Off The Product; The Start Screen; Settings - Fluke VT305 User Manual

VT305
Users Manual
Item
The Micro-SD card is used for software updates and Product configurations. Measurement data can be output
1
through the micro SD card. See the Measurement Data section.
2 The O interface is used to connect the O2 sensor to the Product.
2
The USB port is a data interface. It can also be used to operate with the mains power supply and to charge the
3
battery.
The Analog OUT port is used to output analog signals, connect to an external trigger, operate with the optional
4
mains power supply, and charge the battery of the Product. See the Specifications section for more data.
5 The RS-232 interface is used as a data interface. See the Specifications section for more data.
6 The CAN interface – future use.
7 The Ethernet interface is used to configure the Product and save the file to the SD card.

Operation

The sections that follow tell how to use the Product.

How to Turn On and Turn Off the Product

The Product is turned on and turned off when you push the
power button ().

The Start Screen

When the Product is turned on, the start-up screen in
Figure 7 shows in the display. After approximately
3 seconds the numerical measurement values show in the
display.
10
Table 4. Electrical Interfaces
Description

Settings

Push X on the front panel to show the information screen.
This shows the device data. Push X again to show more
menu items to make adjustments. Push O to change
Figure 7. Start-Up Screen
gyo076.eps