4.7
Connecting the antistatic device EM CRION with discharge mode
Please see Leica EM Crion manual as well.
4.8
Connecting the EM CRION with discharge and charge mode
Please see Leica EM Crion manual as well.
Page 26 Operating Manual Leica EM FC7 01/10
earth of the electrode
electrode
connect cable to earth
(
in the case the PE ground
through the mains cord is
not properly functioning)
remote control cable, connect
the other end to the rear side
of the controller
power cable
earth of the electrode
electrode
connect cable to earth (in
case the PE ground
through the mains cord is
not properly functioning)
remote control cable, connect
the other end to the rear side
of the controller
discharge to footswitch
charge to footswitch
power cable