Insert The Card - Sanyo Xacti VPC-S1 Instruction Manual

Hide thumbs Also See for Xacti VPC-S1:
Table of Contents

Advertisement

Insert the card

The card can be used after it has been formatted with the camera (see page
120).
When inserting the card, make sure that it is correctly oriented.
Take special care to orient the card correctly when inserting it. Attempting to
insert the card incorrectly may result in damage.
Open battery compartment cover
on the camera bottom.
Close the battery compartment
cover.
HINT
About the internal backup battery
œ This camera's internal battery serves to maintain the date and time
settings, as well as the shooting settings. The backup battery will be fully
charged when the batteries are kept in the camera continuously for about 2
days. In the fully charged state, the backup battery will maintain the camera
settings for about 7 days.
When not using the camera for a long time, remove the batteries
œ A small amount of power is still used even if the digital camera is turned off,
and it is therefore recommended that the batteries be removed from the
camera if it is not going to be used for a long time. Note that when the
batteries are removed for a long period, the time and date settings may be
cleared. Before using your camera again, be sure to confirm that the
camera settings are correct.
Insert all the way until it clicks.
œ To remove the card...
1 Open
Do not attempt to forcefully
remove the card.
[l] mark
3 Pull out
2 Push
down
22
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents