Checking The Remaining Card Memory - Sanyo Xacti VPC-S1 Instruction Manual

CHECKING THE REMAINING CARD MEMORY

You can check how many images can be captured and how much shooting
time is available on the card. For a table showing the maximum number of
images and shooting time for specific cards, please see "Possible No. of
Images/Possible Shooting Time" on page 152.
Checking the remaining number of images
and video recording time
1
Set the main switch to Õ, and set
the camera to the desired shooting
mode.
œ The remaining number of images
appears in the upper right of the LCD
monitor (for the still image and
sequential shots shooting modes).
œ The remaining video recording time
appears in the upper right of the LCD
monitor (for the video clip shooting
mode).
œ The remaining number of images and
video recording time will differ
depending on the resolution and
compression settings.
œ When the remaining number of
images or the remaining video
recording time is "0", you cannot
capture any more images. To capture
more images, either install a new
card, or save the images to a
computer (see page 126) and then
erase them (see page 81) from the
card.
Remaining number of images
<Still image shooting mode>
English
6 6 6
122