Video Clips - Sanyo Xacti VPC-S1 Instruction Manual

VIDEO CLIPS

Your camera can shoot video clips (no audio).
1
Set the camera to the video clip
shooting mode (see page 35).
2
Press the shutter release button to
record the video clip.
œ It is not necessary to keep the shutter
release button pressed while
shooting.
œ During recording K appears on the
LCD monitor.
œ When the remaining recording time
available for the currently recording
clip becomes little, a countdown of
the remaining recording time appears
on the display.
3
End the recording.
œ Press the shutter release button to
stop recording.
NOTE
œ The data for a video clip is very large. Therefore, be aware that if the video
clip is uploaded to a computer to be played back, the computer may not be
able to play back the video fast enough, making it appear jerky. (The video
will always be displayed properly on the LCD monitor or a television.)
œ The possible shooting time for each video clip will differ depending on the
card. Also depending on the card, shooting may end even before the
possible shooting time indicated on page 152.
NOTE
œ The sound is not recorded.
43
English
REC (recording) indicator
Recording time (min:sec)
Remaining recording time (sec)
00 : 09
3