Sanyo Xacti VPC-S1 Instruction Manual page 56

ADJUSTING THE SHOOTING SETTINGS
Image quality (compression rate) setting (still
images and sequential shots only)
Use the procedure below to set the compression rate. Even if the same
resolution is used, you can change the compression setting to decrease the
image data size so that you can capture more images, or increase the image
data size for no loss in image quality.
1
Display a Shooting Setting Screen
(see page 44).
2
Select the desired compression rate
from the compression menu, and
press the SET button.
b: Stores the data with a low
compression (high quality).
c: Stores the data with normal
compression (normal quality).
œ The possible compression rate
settings for each shooting mode are
shown in the following table.
Still
image
Shooting
mode
Sequential
shots
55
English
Compres-
2880 x
sion ratio
2160
B
b
Yes
c
Yes
Not
b
available
Not
c
available
COMPRESSION
FINE
<Example: Still image shooting
Resolution (units: pixels)
[Icon displayed on LCD monitor]
2048 x 1600 x
640 x 480
1536 1200
@ D
Yes Yes
Yes Yes
Yes Yes
Yes Yes
mode>
320 x 240 160 x 120
E 2 0
Not Not
Yes
available available
Not Not
Yes
available available
Not Not
Yes
available available
Not Not
Yes
available available
6