Using The Camera With A Computer - Sanyo Xacti VPC-S1 Instruction Manual

USING THE CAMERA WITH A COMPUTER

Using the camera as your computer's
external drive
1
Turn off your digital camera (see page 30).
2
Using the supplied dedicated USB interface cable, connect the
camera connector to the camera and the computer connector to the
proper terminal on your computer.
Dedicated USB interface cable (supplied)
œ Please connect the dedicated USB interface cable to your computer's
USB connector. Do not connect it to the USB port on your monitor or
keyboard, or to the USB hub. Be especially careful when installing the
driver software. In some instances, it may not be possible to correctly
install the driver software.
3
Set the main switch to [PC], and turn
on the power.
œ The camera changes to the PC
connection mode.
œ More information about these
operations can be found in the
instruction manual accompanying the
included Sanyo Software Pack.
NOTE
œ When the digital camera is set to the PC connection mode, no image is
shown on the LCD monitor.
To the DIGITAL/VIDEO terminal
To USB port
Main switch
PC
126
English