Sanyo Xacti VPC-S1 Instruction Manual page 61

2
Press the flash button to select the flash mode.
œ Each time the flash button is pressed, the flash mode icon changes.
Flash button
3
Press the shutter release button.
œ The image is captured in the desired flash mode.
<Shooting without using the LCD monitor>
1
Press the flash button.
œ The LCD monitor turns on briefly to show the currently set flash
mode.
2
Press the flash button within 5 seconds to set the desired flash mode.
NOTE
In the automatic flash mode...
œ In the automatic flash mode using the LCD monitor, when the shutter
release button is depressed halfway, a f icon appearing in the upper
right area of the LCD monitor indicates that the flash will operate.
Flash
English
60