Installing The Unit; Before Installing; Select Location - Saunier Duval 075 AK Installation Manual

2.- INSTALLING THE UNIT

BEFORE INSTALLING

- It is advisable to place the unit close to the installation site without removing it from the packaging.
- Do not put heavy tools or weights on the packaging.
- Upon receipt the unit and the packaging must be checked for damage sustained in transit and if necessary,
a damage claim must be filed with the shipping company.
- Check immediately for installation accessories inside the packaging.
- Do not lift unit by the condensate drain discharge pipe or by the water connections; lift it by the four corners.
(Fig.1)
- The grille panel is separately packed for maximum protection.
- Check and note the unit serial number.

SELECT LOCATION

- Do not install the unit in rooms where flammable gas or alkaline acid substances are present.
Aluminum/copper coils and/or internal plastic components can be damaged irreparably.
- Do not install in workshops or kitchens; oil vapors drawn in by treated air might deposit on the coils and
alter their performance or damage the internal plastic parts of the unit.
- Installation of the unit will be facilitated by using a stacker and inserting a plywood sheet between the unit
and the elevated stacker. (Fig.2)
- It is recommended to position the unit as centrally as possible in the room to ensure optimum air distribu-
tion. (Fig.3)
Generally the best louver position is the one which allows air diffusion along the ceiling.
Alternatively intermediate positions can be selected, or the louvers can be closed completely.
- Check that it is possible to remove panels from ceiling in the selected position, to allow enough clearance
for maintenance and servicing operations.
4