Installing The Indoor Unit; Installing The Drain Hose - Saunier Duval SDC 050 W Installation Manual

3- INDOOR UNIT INSTALLATION
- Install the indoor Unit piping in the direction of the wall
hole and bind the drain hose and pipe together with
vinyl tape.
- Install the piping so that the drain hose is at the
bottom.
- Perform "INDOOR UNIT WIRING" (in separated sheet)
before performing this piping.
- Wrap the pipes of the indoor unit that are visible from
the outdoor with decorative tape.
- After passing the indoor piping and drain hose through
the wall hole, hang the indoor unit on the hooks of the
wall hook bracket.

4. INSTALLING THE DRAIN HOSE

- Insert the drain hose into the drain port.
- For left piping and left rear piping, align the marks n the
wall hook bracket and shape the connection pipe.
- Bend the connection piping at a bend radius of 70 mm.
or more and install no more than 35 mm. from the
wall.
- When extending the drain hose at the indoor unit, ins-
tall the drain insulation.
- Place the indoor unit drain hose behind the drain pipe.

5. INSTALLING THE INDOOR UNIT

- Hang the indoor unit from the hooks at the top of the
wall hook bracket.
- Insert the spacer, etc. between the indoor unit and
the wall hook bracket and separate the bottom of the
indoor unit from the wall.
6. CHECK THAT:
- The top and bottom hooks are hooked fi rmly and the
indoor unit does not move to the front and rear or left
and right. (Fig. 12)
- The indoor unit is accurately positioned horizontally an
vertically.
- When connected from the left rear, the drain hose is at
the bottom left of the wall pipe.
7