Display Indicators; Overview Of The Display Indicators - OHAUS NV212 Service Manual

CHAPTER 1 GETTING STARTED

1.6.2 Overview of the Display Indicators

4
2
1
4
2
1
No. Function
1 Indicates that the measured value has become stable.
2 Indicates that the indicated value is within the center of zero.
3 Symbols for weighing units or modes
4 Arrows indicate the current operation mode of the IR Sensors
5 High, Accept, Low indicators for check weigh mode.
1.6.3 Power On
With power connected, AC Adapter or battery, press Zero/
and software revision number, the display will show * 0.00 and the current unit (standard weighing
mode).
Ohaus Corporation www.ohaus.com
Figure 1-3. Navigator Display Indicators
TABLE 1-4 DISPLAY INDICATORS
12
LCD
LED (old)
LED (new)
. After segment display, "OHAUS"
Navigator Series Service Manual
4
3
5
4
3
5