Functions Of Display Controls - OHAUS NV212 Service Manual

Button
Zero
Yes
Print
Units
No
Function
Mode
Back
Tare
Menu
Exit
IR Sensor-Left
IR Sensor-Right
Navigator Series Service Manual
TABLE 1-3 FUNCTIONS OF DISPLAY CONTROLS
Functions
Short Press (when on): Sets display to zero
(when off): Turns balance on
Long Press (when on): Turns the balance off
Short Press (in Menu): Selects/accepts displayed setting
Short Press: See Interface Manual for operation description.
Long Press: Toggles through active units
Short Press (in Menu): Toggles through available settings
Short Press: Selects function setting
Long Press: Selects active Mode
Short Press (in Menu): returns to previous settings
Short Press: Enter / clear a Tare value
Long Press: Enters User Menu
Short Press (in Menu): Quickly exit User Menu
IR Sensors can be programmed to act as "touchless" buttons.
They can be programmed to perform the Tare, Function, Print
and Zero functions or be disabled. Each sensor is programmed
individually.
11
CHAPTER 1 GETTING STARTED
Ohaus Corporation www.ohaus.com