Page 1
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com ® Navigator Balances Instruction Manual...
® Navigator EN-1 1. INTRODUCTION ® This manual contains installation, operation and maintenance instructions for the Navigator Series. Please read the manual completely before using the balance. 1.1 Safety Precautions Please follow these safety precautions: • Verify that the AC Adapter input voltage matches the local AC power supply. •...
® EN-2 Navigator Approved models – shown with LCD display. 2. INSTALLATION 2.1 Package Contents • Balance • Power Adapter • Warranty Card • Pan • Instruction Manual 2.2 Transportation Lock The Transportation Lock is located under the balance. Rotate the pointer to the unlocked position. Note: No shipping lock on Approved models.
® Navigator EN-3 2.4 Power The AC Adapter is used to power the balance when battery power is not needed. Input Jack Battery Cover Connect the AC Adapter plug to the Connect AC Adapter to the input jack. proper AC supply. Battery installation (without optional internal battery): Remove battery cover and install 4 batteries using the polarity indications as shown in the compartment.
® EN-4 Navigator 3. OPERATION All modes except for weighing must be activated in the User Menu before they are available, see Section 4. 3.1 Weigh Mode 1. Press and hold Mode until [wJeIGH] (Weigh) is displayed. 2. If required, place an empty container on the pan and press Tare. material to the container.
® Navigator EN-5 3.4 Display Hold Mode This mode holds the highest stable weight value for easy reference. 1. Press and hold Mode until [Hold] is displayed. 2. Place samples to be weighed on the pan. When the balance detects the highest stable weight the “Hold Indicator”...
Page 8
® EN-6 Navigator 4. SETTINGS The User Menu allows the customizing of balance settings. Note: Additional Sub-Menus may be available if Interface Options are installed. See Interface User Manual for the additional setting information. 4.1 Menu Navigation User Menu: Sub-Menus: .C.a.l.
Locked Unlocked 5. MAINTENANCE 5.1 Troubleshooting The following table lists common problems and possible causes and remedies. If the problem persists, contact OHAUS or your authorized dealer. Symptom Possible Cause Remedy Cannot turn on No power to balance...
If the troubleshooting section does not resolve or describe your problem, contact your authorized OHAUS service agent. For service assistance or technical support in the United States call toll-free 1- 800-526-0659 between 8:00 AM and 5:00 PM EST. An OHAUS product service specialist will be available to provide assistance.
Page 11
4-button overlay plus two programmable IR sensors Ingress Protection IP43 (NVT and NVL models) NV: 190 mm x 138 mm NV212: Ø120mm Pan Size (W x D) NVL: 194 mm x 203 mm NVT: 230 mm x 174 mm Net Weight NV: 0.9 kg / 2.2 lb...
Page 12
® EN-10 Navigator Note 1: /1 = Factory installed rechargeable battery option /2 = LED display /3 = LED display with factory installed rechargeable battery option Approved Models: Model Max= Approval Class Span Cal. Wt. Lin. Cal. Wts. NV311 310g 0.1g 200g 200g, 300g...
Page 13
Should this device be passed on to other parties (for private or professional use), the content of this regulation must also be related. Disposal instructions in Europe are available online at www.ohaus.com. Choose your country, then search for “WEEE.” Thank you for your contribution to environmental protection.
Need help?
Do you have a question about the Navigator NV212 and is the answer not in the manual?
Questions and answers