Sata Configuration - Supermicro SuperServer E300-8D User Manual

SuperServer E300-8D User's Manual
Legacy USB Support
This feature enables support for legacy USB devices. Select Auto to disable legacy support
if USB devices are not present. Select Disable to have USB devices available only for EFI
applications. The options are Enabled, Disabled, and Auto.
XHCI Hand-Off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The settings are Enabled and Disabled.
EHCI Hand-Off
This item is for the Operating Systems that do not support Enhanced Host Controller Interface
(EHCI) hand-off. When this item is enabled, EHCI ownership change will be claimed by the
EHCI driver. The settings are Enabled and Disabled.
USB 3.0 Support
Select Enabled for USB 3.0 support. The options are Smart Auto, Auto, Enabled, Disabled.
EHCI1
Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on USB 2.0
connector #1 (at least one USB 2.0 connector should be enabled for EHCI
options are Disabled and Enabled.
EHCI2
Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on USB 2.0
connector #2 (at least one USB 2.0 connector should be enabled for EHCI
options are Disabled and Enabled.
XHCI Pre-Boot Driver
Select Enabled to enable XHCI (Extensible Host Controller Interface) support on a pre-boot
drive specified by the user. The options are Enabled and Disabled.
SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA
devices that are supported by the Intel PCH chip and displays the following items:
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel PCH chip.
The options are Enabled and Disabled.
58
support). The
support). The