Table of Contents
Advertisement
SBA-7141A-T Blade Module User's Manual
System Health Monitor
The menu options in the System Health Monitor and their descriptions are shown in
Table
5-23.
Menu Option
CPU Overheat
Temperature
System Health
Display (Static)
5-6
Boot Menu
The menu options for the B
Menu Option
Boot Settings
Configuration
Quick Boot
Quiet Boot
AddOn ROM
Display Mode
Bootup Num-Lock
PS/2 Mouse
Support
Wait for 'F1' If
Error
Hit 'DEL' Message
Display
Interrupt 19
Capture
Boot Device
Priority
Table 5-23. System Health Monitor
Description
This sets the CPU Overheat temperature from 65-degrees to 90-degrees C by
using the +/- keys on your keyboard. Default is 72-degrees C.
The S
H
M
YSTEM
EALTH
the following information: CPU1 T
T
, CPU1 V
EMPERATURE
DDR3 VTT, CPU2 DDR3 VTT, 5V
menu are shown in
OOT
Table 5-24. Boot Menu
Description
This sub-menu allows you to configure setting for system boot.
If E
, this option will skip certain tests during POST to reduce the time
NABLED
needed for the system to boot up. The options are Enabled and D
If Disabled, normal POST messages will be displayed on boot-up. If E
this display the OEM logo instead of POST messages.
Set this option to display add-on ROM (read-only memory) messages. The
options are Force BIOS and K
• Select Force BIOS to allow the computer system to force a third party BIOS
to display during system boot.
• Select K
C
EEP
URRENT
information during system boot.
Set this value to allow the N
The options are On and O
Use this setting to Enable or Disable support for a PS/2 mouse in your system.
Options include Enabled, Disabled and Auto.
Select Enable to activate the W
Enabled and Disabled.
Select Enabled to display message to hit the DEL key to enter S
options are Enabled and Disabled.
Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled and
Disabled.
Use this sub-menu to specify the boot device priority sequence for devices
installed in your system. .
submenu contains systems monitor displays for
ONITOR
EMPERATURE
, CPU2 V
, 3.3V V
CORE
CORE
and
STANDBY
Table
C
. The default setting is Force BIOS.
EEP
URRENT
to allow the computer system to display the BIOS
L
setting to be modified during boot up.
UMBER
OCK
.
FF
F1
AIT FOR
IF
5-20
, CPU2 T
EMPERATURE
, +5V
, +12V
CC
IN
.
BATTERY VOLTAGE
5-24.
ISABLED
E
function. The options are
RROR
ETUP
, S
YSTEM
, CPU1
IN
.
,
NABLED
. The
Advertisement
Table of Contents
