Delta NovoPRO User Manual page 95

Fill in the values of some settings:
1. When opened, the text will look like this:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<NovoPRO>
<edition>CORP or
<wifi-ssid>example_wifi</wifi-ssid>
<wifi-password>example_wifi_password</wifi-password>
<remote-manager-ip-address>0.0.0.0</remote-manager-ip-address>
<remote-manager-port-number>20142</remote-manager-port-number>
</NovoPRO>
</configuration>
2. Change appropriate setting value according to your setup environment, and delete the ones
you don't need. The following table describes each setting in details.
Key
edition*
wifi-ssid
wifi-password
remote-manager-ip-address*
remote-manager-port-number*
Note: Settings marked with "*" are supported in NovoPRO software release V2.2 and above.
Copyright © 2016 DELTA Electronics, Inc. All rights reserved.
EDU</edition>
Value (example)
CORP or EDU
(example_wifi)
(example_wifi_password)
(0.0.0.0)
20142
NovoPRO User Manual 2.X
Explanation
Edition value. It has to be either CORP or EDU. Refer
to Section 1.4 for more details about these two
editions.
Wifi network SSID name
Wifi network password
IP address of Remote Manager software
The port number used by Remote Manager software
to listen to device reporting. 20142 is the default
number. You need change it to match your Remote
Manager's setting.
Page 94