Step 2: Connect To Your Novopro Device - Delta NovoPRO User Manual

3.1.2 Step 2: Connect to your NovoPRO device

Once you have set up session parameters, you are ready to start or join a presentation.
Function
Copyright © 2016 DELTA Electronics, Inc. All rights reserved.
1. Projection Mode:
Video Playback: Select this option for video-quality
image, with synchronized audio. (You might notice
some sluggishness in mouse movement due to the
needs of buffering to ensure smooth video
playback.)
Presentation: Select this option for low-latency
and fast-response presentation. Audio signal is not
transmitted. Two additional drop-down
configurations, Visual Quality and Screen Refresh
Rate, will be enabled.
2. Visual Quality:
High: This setting yields the best visual quality but
has the most latency and may result in longer
video delay.
Normal: This setting yields the normal visual
quality with the normal CPU consumption.
3. Screen Refresh Rate:
High: This setting yields the enhanced visual
quality but results in higher CPU consumption.
Normal: This setting yields the normal visual
quality with the normal CPU consumption.
4. Check for updates:
Click to check whether Novo Desktop Streamer is
the latest. If not, initiate an upgrade process.
Description
NovoPRO
Connect to your
Click on button . If you are the first participant, this will start a
presentation session. If you are not the first participant, you will be
joining a presentation session.
After a successful connection, you will see the connection tab lit up
.
If you are the first participant, you will see that your desktop is
mirrored to NovoPRO's screen.
You can turn on/off the PIN switch to enable/disable the use of PIN
code for the presentation session.
NovoPRO User Manual 2.X
device.
Page 23