Wifi Client Mode - Delta NovoPRO User Manual

To set up "Static IP" properly, you
need to have the
information, as shown in the diagram
on the right.
 An unallocated IP address;
 Netmask;
 DNS address;
 Gateway address.

2.1.2 WiFi client mode

In this mode, NovoPRO functions as a client to join an existing WiFi network. As illustrated in the
following diagram, to set up the WiFi connection, on NovoPRO home screen, click on button WiFi 
Connect to WiFi  Configure  Wi-Fi (ON). Then select the desired Wi-Fi SSID (the name associated
with the Wi-Fi network) and enter the proper credentials when necessary.
You may notice that you have the choice of using "DHCP" or "Static IP" in the connection dialog,
which is exactly the same as Ethernet connection.
Copyright © 2016 DELTA Electronics, Inc. All rights reserved.
following
NovoPRO User Manual 2.X
2
1
Page 15