Setting Moderator Credentials - Delta NovoPRO User Manual

3. Once you have selected the devices to update, click "Update Now."

6.6 Setting moderator credentials

When using NovoPRO, the first connected user is assigned as the meeting moderator by default.
However, this may not be the intended result in real world as the "real" moderator may not be the
first user to join the session. The feature "Moderator Credentials" is designed to address this issue.
Here is how it works:
1. Moderator Credentials, consisting of a list of moderators and the corresponding passwords,
are stored on NovoPRO units. (Moderator Credentials are managed via software Remote
Manager.)
2. When a user device connects to a NovoPRO unit, the user device send its moderator
password (if any) to the NovoPRO unit. If the password matches the one stored on the
NovoPRO unit, the user device will be assigned as the moderator, regardless it is the first
device to connect or not.
The picture below illustrates the process.
Manage
"Moderator Credentials"
RemoteManager
Setting up Moderator Credentials in Remote Manager:
1. To set moderator credentials for a device, select the device from the device list and click
"Set Moderator."
Copyright © 2016 DELTA Electronics, Inc. All rights reserved.
Moderator Credentials
Moderator David, Password AAA
Moderator John, Password BBB
Moderator Kate, Password CCC
......
If matched, the user
device is assigned as the
moderator automatically.
NovoPRO User Manual 2.X
Submit "Password"
for authentication
User Devices
Page 101