Wifi Hotspot Mode; Dual-Network Configuration - Delta NovoPRO User Manual

NovoPRO User Manual 2.X

2.1.3 WiFi hotspot mode

A newly unpacked NovoPRO starts up in Wi-Fi Hotspot mode, where you can start using it without
any entanglement with networking setup. The default SSID for this WiFi Hotspot is "NVC_XXXXX" (for
example, "NVC_4DF8F" in the following screenshot), where "XXXXX" is a device-generated text string.
Please note that Android mirroring (Miracast) is disabled in this mode. In comparison, AirPlay
mirroring has no such limitation.

2.1.4 Dual-Network Configuration

NovoPRO can even be connected to both your organization's wired network and wireless network
simultaneously. This function is extremely useful for organizations with "guest" wireless network
setup for external visitors. In such a case, NovoPRO's RJ45 port is connected to a wired EMPLOYEE
network for employees to securely access it; at the same time NovoPRO's WiFi is connected to a
GUEST network to allow visitors to access it. The following graph describes such a network setup
scenario.
Copyright © 2016 DELTA Electronics, Inc. All rights reserved. Page 18