Hardware Setup; Novopro Home Screen - Delta NovoPRO User Manual

1.2 Hardware Setup

1 2 3
7
11 10 9
Setting up NovoPRO is simple and straightforward.
1) Video/Audio connection: Connect the HDMI port to a TV/projector's HDMI input port with
the provided HDMI cable (item (2) in "Package Content").
2) Power: Connect the DC Power Jack to a power outlet with the provided USB power adaptor
and USB cable (items (3) and (5) in "Package Content").
If everything is set up properly, NovoPRO's green LED should be illuminated.
Note:
 You may connect an optional USB mouse/keyboard or a USB disk to the USB port.
 If more USB ports are needed, you can connect a USB hub to the USB port.
 The microSD slot supports microSD cards up to 64GB.

1.3 NovoPRO Home Screen

After a successful boot-up, the NovoPRO device will show the following screen, which is referred to
as "NovoPRO home screen" or just "home screen" in this document. The home screen is generated
by NovoPRO's main application, Remote Viewer.
Copyright © 2016 DELTA Electronics, Inc. All rights reserved.
4 5
6
8
NovoPRO User Manual 2.X
1 RJ45 (Ethernet) Port
2 USB Port
3 HDMI Port
4 DC Power Jack
5 Kensington® Security Slot
6 microSD Card Slot
7 Reset button
8 IR Receiver
9 System Power On (Green)
10 System Standby mode (Red)
11 Network activities
Page 6