Table of Contents
Advertisement
5.0 kg
11.0 lb
Storage blade warnings and cautions
WARNING:
remove the storage blade access panel and then install the storage blade into the enclosure.
WARNING:
internal system components to cool before touching them.
CAUTION:
storage blade in this manner results in improper airflow and improper cooling that can lead to
thermal damage.
CAUTION:
and/or the system. However, it may be necessary to leave the storage blade powered up when
performing other operations, such as hot-plug installations or troubleshooting.
Storage blade preparation
Servicing internal storage blade components
To service any internal storage blade component, do the following:
Power down the partner server blade (on page 22).
1.
Remove the storage blade (on page 22).
2.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING:
To reduce the risk of electric shock, fire, or damage to the equipment, do
not plug telephone or telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot component. If this surface is
contacted, the potential for injury exists.
WARNING:
To reduce the risk of injury from a hot component, allow the surface to cool
before touching.
This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.
WARNING:
To reduce the risk of personal injury or damage to the equipment, observe
local occupational health and safety requirements and guidelines for manual material
handling.
These symbols, on power supplies or systems, indicate that the equipment is supplied
by multiple sources of power.
WARNING:
To reduce the risk of injury from electric shock, remove all power cords to
completely disconnect power from the system.
To reduce the risk of shock or injury from high-current electrical energy, do not
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Do not operate the storage blade with the access panel removed. Operating the
When performing non-hot-plug operations, you must power down the storage blade
Removal and replacement procedures 21
Hide quick links:
Advertisement
Table of Contents
