Drive Drawer Slide Assemblies - HP StorageWorks D2200sb Maintenance And Service Manual

Remove the drive drawer.
8.
To replace the component, reverse the removal procedure.
CAUTION:
Otherwise, damage may occur to the pass-through board or drive drawer.

Drive drawer slide assemblies

WARNING:
internal system components to cool before touching them.
CAUTION:
before beginning any installation procedure. Improper grounding can cause ESD.
CAUTION:
the storage blade in this manner results in improper airflow and improper cooling that can lead
to thermal damage.
To remove the component:
Back up all data on the storage blade.
1.
Power down the partner server blade (on page 22).
2.
Remove the storage blade (on page 22).
3.
Remove all drives
4.
Remove the access panel (on page 26).
5.
Remove the drive drawer
6.
Remove the slide assemblies from the drive drawer:
7.
Be sure the pass-through board is fully installed before installing the drive drawer.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server blade
Do not operate the storage blade with the access panel open or removed. Operating
("Remove the drives" on page 24).
("Drive drawer" on page 37).
Removal and replacement procedures 39