to thermal damage.
To remove the component:
Back up all data on the storage blade.
1.
Power down the partner server blade (on page 22).
2.
Remove the storage blade (on page 22).
3.
Remove all drives
("Remove the
4.
Remove the access panel (on page 26).
5.
Remove the drive drawer
6.
Remove the bottom drive drawer slide assembly from the chassis.
7.
You do not need to remove the remaining slide assembly from the chassis or either slide assembly from
the drive drawer.
drives" on page 24).
("Drive
drawer" on page 37).
Removal and replacement procedures 42