Replacing The Fan And Control Pcb In The Middle Divider (Cwb8420Dz) - EdgeStar CWB8420DZ Service Manual

8.3.1 Replacing the Fan and Control PCB in the Middle Divider (CWB8420DZ)

1. Remove all shelves.
2. Remove the five screws holding the bottom plate to the middle divider.
3. Remove the four screws holding the top plate to the middle divider.
4. Remove the top plate from the cabinet and slide the middle divider forward to access its
components. Carefully remove and save silver tape if necessary to access wiring. Replace
tape when finished.