Reversing The Door Swing (Cwb8420Dz) - EdgeStar CWB8420DZ Service Manual

7. Reversing the Door Swing (CWB8420DZ)

The door of this unit can be mounted so it swings open from either the left or right side. It is
delivered with the door opening from the left side. Follow these instructions to reverse the door
swing.
Note: All removed parts must be saved to remount the door in its original position.
1. Lay unit on its back and remove the bottom hinge
(Fig. 1). Gently remove the glass door from the top right hinge and place it on a padded
surface to avoid damage.
2. Unscrew and transfer hinge pin
(Fig. 2).
3. Remove the top right hinge
covering the screw holes on the left side of the cabinet and move them to the right side.
Screw the left top hinge
4. Unscrew and transfer the lock bracket
remove the cap
door (Fig. 5).
5. Rotate the door 180° and install it on the opposite side of cabinet. Replace the bottom hinge
assembly on the left side of the cabinet by reinstalling the four lock screws.
○
7 and door stopper
○
9 by removing the three screws
○
11 ( included with the unit)
○
12 covering the three screw holes and transfer it to the opposite side of
○
5 by unscrewing the four lock screws
○
8 to opposite sides of bottom hinge
on the left hand side of the cabinet.
○
13 to the opposite side of glass door (Fig. 4). Also
○
. Pop out the three caps
10
○
6