Ordering Information - EXFO FOT-930 MaxTester Manual

ORDERING INFORMATION

Model
FOT-932 = Ge detector, dual-wavelength 1310/1550 nm
FOT-932-4 = Ge detector, triple-wavelength 1310/1550/1625 nm
FOT-932-5 = Ge detector, triple-wavelength 1310/1490/1550 nm
FOT-932X = GeX detector, dual-wavelength 1310/1550 nm
FOT-932X-4 = GeX detector, triple-wavelength 1310/1550/1625 nm
FOT-932X-5 = GeX detector, triple-wavelength 1310/1490/1550 nm
FOT-933 = InGaAs detector, dual-wavelength 1310/1550 nm
FOT-933-4 = InGaAs detector, triple-wavelength 1310/1550/1625 nm
FOT-933-5 = InGaAs detector, triple-wavelength 1310/1490/1550 nm
FTB-932-MM = Ge detector (with multimode second source only)
Second Source
00 = Without second source
12C = 850/1300 nm LED 50/125 µm
12D = 850/1300 nm LED 62.5/125 µm
Talk Set and Visual Fault Locator
00 = Without talk set and VFL
VFL = With visual fault locator
VFT = With talk set and VFL 2 (universal 2.5 mm connector)
Notes
1. Not available with second source.
2. Not available with triple-wavelength model equipped with second source.
3. Comes with FIPT-U25M for 2.5 mm connectors, FIPT-FC and FIPT-SC for bulkhead connectors.
4. Connector type for the talk set is the same as the one specified for the main source.
5. Second source must be selected.
*
EXFO Universal Interface is protected by US patent 6,612,750.
Safety
21 CFR 1040.10 and IEC 60825-1:1993+A1:1997+A2:2001:
Emitters used for sources, FasTesT, ORL and talk set
CLASS 1 LASER PRODUCT
CLASS 1 LED PRODUCT
The FOT-930's optional VFL is a Class 3R laser product. Output power level is lower than the maximum specified on label.
Refer to specifications for output power.
Find out more about EXFO's extensive line of high-performance portable instruments by visiting our website at www.exfo.com.
Rugged Handheld Solutions
OLTS
Power meter
Light source
Talk set
Distributed by: Mega Hertz
800-883-8839 sales@megahz.com www.megahz.com
EXFO is certified ISO 9001 and attests to the quality of these products. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EXFO
has made every effort to ensure that the information contained in this specification sheet is accurate. However, we accept no responsibility for any errors or omissions, and we
reserve the right to modify design, characteristics and products at any time without obligation. Units of measurement in this document conform to SI standards and practices.
Contact EXFO for prices and availability or to obtain the phone number of your local EXFO distributor.
For the most recent version of this spec sheet, please go to the EXFO website at http://www.exfo.com/specs
In case of discrepancy, the Web version takes precedence over any printed literature.
SPFOT930.9AN © 2005 EXFO Electro-Optical Engineering Inc. All rights reserved.
FOT-93X-XX-XX-XX-X-XX
5
4
Connector
EI-EUI-28
EI-EUI-76
EI-EUI-89
EI-EUI-90
EI-EUI-91
EI-EUI-95
EA-EUI-28
EA-EUI-89
EA-EUI-91
EA-EUI-95
Software Language
A = English
C = Simplified Chinese
E = Spanish
F = French
G = German
X = Czech
Fiber Inspection Probe
00 = Without probe
FP = Probe option and connection cable
FP1 = Probe connection cable and 200x probe
FP5 = Probe connection cable and 200x/400x probe
Example: FOT-932X-4-VFL-FP-A-EI-EUI-89
If VFL option is available
Optical Fiber DWDM Test Systems
OTDR OSA
OLTS PMD analyzer
ORL meter Chromatic dispersion analyzer
Switch Multiwavelength meter
Printed in Canada 05/02
FOT-930 MaxTester
*
= UPC/DIN 47256
= UPC/HMS-10/AG
= UPC/FC narrow key
= UPC/ST
= UPC/SC
= UPC/E-2000
= APC/DIN 47256 1
= APC/FC narrow key 1
= APC/SC 1
= APC/E-2000 1
3
IEC 60825-1:1993+A2:2001
21 CFR 1040.10
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
λ: 650 ±10 nm
P out maximum < 5mW (into free space)
Transport/Datacom
10/100 and Gigabit Ethernet
SONET/SDH (DS0 to OC-192c)
SDH/PDH (64 kb/s to STM-64c)
SAN
3