EXFO FOT-930 MaxTester Manual page 4

A Single Tool for All Backreflection,
Fiber-Length and Loss Measurement Needs
Because learning how to operate only one instrument is easier and much faster, test
specialists should choose an all-in-one tool that enables them to perform tasks such as
installing long-haul high-speed networks, testing 1310/1490/1550 nm transmission in
FTTH networks, performing multimode testing in enterprise networks, etc.—a do-it-all
solution such as the FOT-930 MaxTester.
Key Advantages for All Network Types
Fast, three-wavelength loss and ORL testing
User-configurable pass/fail thresholds for error-free testing
The only unit designed for testing both multimode and singlemode fiber
Video fiber inspection probe, for easy viewing of connectors and fiber ends on the
FOT-930's high-resolution display
GeX detector, for high-power measurement up to +26 dBm
Complete report generation capabilities
Talk set and VFL options
Ease of use, for faster testing, reduced training, minimum error potential, etc.
Talk Set Port
For crystal-clear voice communication.
Power Meter Detector Port
Compatible with almost every connector on
the market. Manually and efficiently perform
power and loss testing. Accurately
measure power up to +26 dBm.
FOT-930 MaxTester
In 10 seconds, the MaxTester's FasTest function provides
insertion loss and ORL values for up to three wavelengths—
including either 1490 or 1625 nm—on a single port.
FasTesT Ports
Perform loss, ORL and fiber length
measurements for up to three SM
wavelengths on one port, and for two MM
wavelengths on a second port.
VFL
Built-in 650 nm visual fault location on a
universal connector.