Calling Another Party Using The Address Book; Setup Of Telephone Functions - Yamaha PJP-50R Basic Operation Manual

The following display appears if the call is connected
and conversation becomes available.
408467
Menu :Address
Tel. No. of other system
y
Press during communication to view the setting of the
system as shown below.
IP: 192.168.100.200
Notes
• Do not disconnect the modular telephone cable or power
cable during a call. Doing so may cause malfunction.
• If the call failed, check the following:
–The destination unit is turned on.
–This unit is connected to the network properly.
–Check the call history to identify the cause of the trouble.
–See "Q2: A call cannot be made" (page 21).
4
To disconnect the call when the conference
is complete, press .
Communication through Telephone Circuit
Calling another party using the
address book
Follow the procedure below to call another party
registered in the address book.
y
To use this function, it is required to use the PC for registering the
telephone numbers of the locations to be called in the Address
Book. For details refer to "Editing the Address Book" (page 23)
in the "Setup guide" (a separate manual).
1
Press repeatedly until the initial display
appears.
2
Press .
The Address Book display appears.
Address Book
Headquarter
Branch A
Branch B
3
Press or to select the destination, and
then press .
The calling display appears.
Address Book
Headquarter
Headquarter
Branch A
Headquarter
Branch B
Branch B
Branch A
:Cancel
The registered name of the destination appears if the
call is connected and conversation becomes available.
y
If you know the registration number of the destination in the
address book, you can call the address by pressing the
numeric keys. After entering "9#" (prefix), enter the
registration number of the desired address and then
press .
15