Table of Contents
Advertisement
CPU Configuration
This section is used to configure the CPU . It will also displa y the detected CPU inf ormation.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
CPU Confi guration
Intel(R) Core(TM) i3-4340TE CPU @ 2.60GHz
CPU Signature
306c3
Processor Family
6
Microcode Patch
1c
FSB Speed
100 MHz
Max CPU Speed
2600 MHz
Min CPU Speed
800 MHz
CPU Speed
2600 MHz
Processor Cores
2
Intel HT Technology
Supported
Intel VT-X Technology
Supported
Intel SMX Technology
Not Supported
64-bit
Supported
EIST Technology
Supported
CPU C3 State
Supported
CPU C6 State
Supported
CPU C7 State
Supported
L1 Data Cache
32 KB x 2
L1 Code Cache
32 KB x 2
L2 Cache
256 KB x 2
L3 Cache
4096 KB
Hyper-threading
[Enabled]
Active Processor Cores
[All]
Intel Virtualization Technology
[Enabled]
EIST
[Enabled]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Hyper-threading
Enables this field f or Windows XP and Linux which are optimized f or Hyper-Threading
technology. Select disabled f or other OSes not optimized f or Hyper-Threading technol-
ogy. When disabled, only one thread per enabled core is enabled.
Active Processor Cores
Number of cores to enable in each processor package.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardw are capabili-
ties provided by Vanderpool Technology.
EIST
This field is used to enable or disable the Intel Enhanced SpeedStep T echnology.
Chapter 3 BIOS Setup
Chapter 3
SATA Configuration
This section is used to configure the f unctions of Serial A TA devices.
Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology). When
Disabled only one thread
per enabled core is
enabled.
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Reset
ESC: Exit
32
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
SATA Controller(s)
[Enabled]
SATA Mode Selection
[IDE]
Serial ATA Port 0
Empty
Software Preserve
Unknown
Serial ATA Port 1
Empty
Software Preserve
Unknown
Serial ATA Port 4
Empty
Software Preserve
Unknown
Serial ATA Port 5
Empty
Software Preserve
Unknown
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
SATA Controller(s)
This field is used to enable or disable the Serial A TA devices.
SATA Mode Selection
The mode selection determines how the S ATA controller(s) oper ates.
IDE Mode
This option configures the Serial A TA drives as P arallel ATA storage devices.
AHCI Mode
This option allows the Serial A TA devices to use AHCI (Adv anced Host Controller Inter -
face).
Enable or disable SATA
Device.
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save and Reset
ESC: Exit
www.df .com
Advertisement
Table of Contents
