User Button and Light
The printer's U
U
button to:
SER
Suspend the printer—press the U
Clear a message—press the U
Clear all messages—press the U
Determine whether the system is ready, busy, or not available. Indicators include the
following. Refer to
correspond to the U
Off
Green
Flashing green
Amber
Flashing amber
Color Cycle:
Amber, Green,
Light Green, Off
20
button displays with a border of light that indicates the system status. Use the
SER
SER
button once.
SER
SER
"Messages and Conditions"
light.
SER
The system is off or suspended.
The system is ready.
The system is busy. The light flashes slowly (every
2 seconds).
OR
The system has a hardware error in the embosser.
The light flashes quickly (every 1/2 second).
The system is not ready.
The P
button was pressed to turn off the
OWER
printer.
The system has a problem. The light flashes at a
medium rate (every second).
OR
The system has a hardware error in the printer.
The light flashes quickly (every 1/2 second).
The system is not ready or a door on the system is
open. The colors cycle quickly (every 1/2 second).
Close and Lock Doors displays on the LCD panel if
no other message is present.
button when the LCD panel displays Ready.
button for 2 seconds or more.
on
page 63
for a list of the LCD messages that
Using the System