High-Speed Counter Unit Components; Nomenclature; Indicator Functions - Omron C200H-CT021 Operation Manual

High-speed Counter Unit Components

2-2

High-speed Counter Unit Components

2-2-1

Nomenclature

2-2-2

Indicator Functions

12
Indicators
Rotary switches
External connector
Indicator Name
RUN Operation
ERR Error
CH1 A Counter 1 input A
B Counter 1 input B
1 Counter 1 external
control input IN1
2 Counter 1 external
control input IN2
CH2 A Counter 2 input A
B Counter 2 input B
1 Counter 2 external
control input IN1
2 Counter 2 external
control input IN2
01234567 External output
Rear setting
switch
Backplane
connector
Function
Lit when the High-speed Counter is in normal
counting operation. Not lit when the High-speed
Counter stops counting pulses.
Lit when an error, counter overflow, or counter
underflow results.
Lit when counter 1 input A is ON.
Lit when counter 1 input B is ON.
Lit when external control input IN1 is ON.
Lit when external control input IN2 is ON.
Lit when counter 2 input A is ON.
Lit when counter 2 input B is ON.
Lit when external control input IN1 is ON.
Lit when external control input IN2 is ON.
These indicators light when the corresponding
external output (0 through 7) is ON.
Section 2-2