Yamaha AG200FZ Owner's Manual page 27

With the engine turned off:
1. Make sure that the engine stop switch is set to "
2. Turn the key to "ON".
3. Shift the transmission into the neutral position.
4. Push the start switch.
Does the engine start?
5. Turn the engine off.
6. Shift the transmission into gear.
7. Keep the clutch lever pulled.
8. Push the start switch.
Does the engine start?
The system is OK. The motorcycle can be ridden.
INSTRUMENT AND CONTROL FUNCTIONS
".
YES NO
YES
NO
WARNING
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
4-12
2
3
4
5
6
7
8
9