Sidestands; Starting Circuit Cut-Off System - Yamaha AG200FZ Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Sidestands

1
2
3
1
4
1. Sidestand (left)
5
6
7
8
9
1. Sidestand (right)
The sidestands are located on the left
and right side of the frame. Raise a sid-
estand or lower it with your foot while
holding the vehicle upright.
EAU48860
WARNING
The vehicle must not be ridden with
either sidestand down, or if a side-
stand cannot be properly moved up
(or does not stay up); otherwise the
sidestands
ground and distract the operator, re-
sulting in a possible loss of control.
1
EWA15410
could contact the
4-11

Starting circuit cut-off system

The starting circuit cut-off system (com-
prising the clutch switch and the neutral
switch) prevents starting when the
transmission is in gear and the clutch
lever is not pulled.
Periodically check the operation of the
starting circuit cut-off system according
to the following procedure.
TIP
This check is most reliable if performed
with a warmed-up engine.
EAU15391