The front panel provides the following components:
•
Forty eight RJ-45 connectors for 10/100/1000 Mbps autosensing Gigabit Ethernet
switching ports
•
Two 100M/1G/10GBASE-T copper ports (49–50) that you can also use for stacking
•
Two 10G/1G SFP+ fiber ports (51–52) that you can also use for stacking
•
One USB 2.0 port that supports FAT32 and VFAT file systems
•
Reset button to restart the device
•
Recessed Factory Defaults button to restore the device back to the factory defaults
•
Link, Speed, and Activity LEDs for each port and for the PoE model, PoE LEDs for
ports 1–48
•
Power, Fan, and Stack ID LEDs; for model S3300-52X-PoE+ only, PoE Max LED
The following figures illustrate the back panel of models S3300-52X and S3300-52X-PoE+:
Console port
Figure 4. Back panel model S3300-52X
Console port
Figure 5. Back panel model S3300-52X-PoE+
From left to right, the back panel provides the following components:
•
Serial console port that is configured for 115200, N, 8, 1. The serial port is for debugging
purposes by NETGEAR support. (The port requires a special adapter.)
•
Slot for an optional redundant power supply (RPS, model S3300-52X-PoE+ only).
•
Kensington lock.
•
AC power input connector.
S3300 Smart Switch
RPS slot
Physical Description
12
Kensington lock
Kensington lock
AC input connector
AC input connector