Testing Device Signal Strength - Yale IA-210 Full User Manual

Test your planned location of devices and check the signal strength on the panel screen.
5.Device Installation: Testing Device Signal Strength
5
After all devices have been tested in the desired location -
10
10
Press or
PIN code to access the main menu
Scroll down using
"Test" and press
Select "Device" and press
panel into learning mode
Press button to test connection
PIR Zone03 E
T:9 PIR 1
Press
button and enter your
button and select
to enter the
8 9
If signal strength is below 2 please try
to move the device to a different
location and repeat connection test.
to exit Test mode
•