Yale IA-210 Full User Manual page 18

• A 24 Hour Door/Window Contact is active all
of the time and does not have to be armed or
disarmed, if triggered a burglar alarm will be
activated immediately.
Emergency
• An emergency device that is active all of the
time does not have to be armed or disarmed. If
triggered an emergency alarm will be activated
immediately.
Edit Devices
To edit all of the devices that has already been
installed, choose 'edit devices'. All of the devices
included in the system will be displayed.
1. Use st keys to scroll the display and choose the
device for editing. Press 3 to select.
2. After confirming the zone type (if available), you
are now asked to enter a name. Press 3 to
confirm or X to cancel without naming.
• Each device can be given a 12 character name.
Names can be given either when first adding a
device or by editing them later.
• When the "Enter Zone Name" screen is displayed
the numeric keyboard can be used to enter text.
Simply find the corresponding numeric key with
the required character and press repeatedly until
the wanted character appears. Release the key
and the flashing cursor automatically jumps to
the next position for you to continue with the next
character by the same method.
• The keys have the following functions:
1 1
2 2ABCabc
3 3DEFdef
4 4GHIghi
5 5JKLjkl
6 6MNOmno
7 7PQRSpqrs
8 8TUVtuv
9 9WXYZwxyz
0 0 <space>/&'."+
P Backspace and delete
• The name can be erased by clearing the display by
pressing X repeatedly, followed by 3.
4. Press 3 when completed to confirm the name
and return to the device list.
Remove Device
To delete a device choose 'remove device' in the
"Edit device" menu. A list of all programmed devices
will be shown.
1. Use st keys to select the device you wish to
delete and press 3.
2 The selected device will be displayed again, press
3 to confirm deletion or X to return to the device
list without deleting.
• If a device name has not been programmed the
screen will show the preset zone number instead.
Program External Siren
To program the Siren, select 'program Siren' in
the "Edit device" menu. The following items are
available in this menu:
• Siren Tamp. On
• Siren Tamp. Off
• Confirm On
• Confirm Off
• Entry Snd On
• Entry Snd Off
• Comfort LED
External Siren Tamp. On, Siren Tamp. Off
The External Siren tamper switch can be enabled
and disabled remotely.
• The External Siren tamper protection automatically
switches back on after one hour.
Confirm On, Confirm Off
The External Siren can be enabled for Arming and
disarming confirmation where one pip and flash is
given for arming, with two pips and flashes from
side to side for disarming.
Entry Sound On, Entry Sound Off
The entry and exit warning beeps can be echoed on
the External Siren.
Comfort LED
If enabled, the External Siren LED will flash
periodically according to the set interval. This will
reduce the battery life accordingly. Select disable to
disable this function (Default Off).
18
18