Reducing Noise In The Picture - RCA PR42300 User Manual

THE MENU SYSTEM
REDUCING NOISE IN THE PICTURE
Noise is a term used to describe extraneous bits of information in the signal
that affect the clearness of the picture. You can use the Noise Reduction
(NOISE REDUCE) setting if your reception is poor or when playing video
tapes that have poor picture quality.
The NOISE REDUCE option has four settings, including OFF. The higher
the setting, the stronger the effect. The settings switch as follows when the
• button is pressed:
[ OFF LOW MEDIUM HIGH q
J
change the noise reduction setting:
1,
From the PICTURE QUALITY menu, highlight the NOISE REDUCE
option, and select it by pressing the • button. The NOISE REDUCE
SCREEN is displayed.
2. Use the • and • buttons to select the desired noise reduction setting.
,
NOTE: If you don't push the • or • button within 5 seconds, the
current setting is accepted and the previous screen reappears.
When the desired setting is displayed, press OK to return to the
PICTURE QUALITY menu. You can continue adjusting picture
settings, return to the main menu, or press CLEAR to exit the menu
system.
This is the PICTURE QUALITY menu with the
NOISE REDUCE (noise reduction) option
highlighted.
N6iSE REbU_ E
Thisis the NOISEREDUCE(noisereduction)
screen.
27