Vibrate
Vibrate
Command Barcodes are available on pages
LED, beep, and vibrate settings.
If you are using a scanner-enabled application, typically the
application provides settings for LED, beep, and vibrate settings.
Configuration Settings
Time after powering on
Scanner
0-5 minutes
5 minutes
2 hours
PRODUCT SPECIFICATIONS
Meaning
Data successfully scanned
Bluetooth mode
Discoverable and connectable
If connection is not made, scanner
powers off
If your scanner is connected but not
used it will power off in 2 hours.
When trigger button is pressed the
timer is reset.
43-46
to modify the
26