Moxa Technologies AWK-3191 Quick Installation Manual
  1. Manuals
  2. Brands
  3. Moxa Technologies Manuals
  4. Wireless Access Point
  5. AirWorks AWK-3191
  6. Quick installation manual
Moxa Technologies AWK-3191 Quick Installation Manual

Moxa Technologies AWK-3191 Quick Installation Manual

Hide thumbs Also See for AWK-3191:
Table of Contents

Advertisement

Quick Links

Download this manual

Quick Installation Guide

Moxa Americas:
Toll-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax:
1-714-528-6778
Moxa Europe:
Tel:
+49-89-3 70 03 99-0
Fax:
+49-89-3 70 03 99-99
Moxa India:
Tel:
+91-80-4172-9088
Fax:
+91-80-4132-1045
AWK-3191
Moxa Airworks
Edition 2.0, June 2016
Technical Support Contact Information
www.moxa.com/support
 2016 Moxa Inc. All rights reserved.
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel:
+86-21-5258-9955
Fax:
+86-21-5258-5505
Moxa Asia-Pacific:
Tel:
+886-2-8919-1230
Fax:
+886-2-8919-1231
P/N: 1802031910011
*1802031910011*

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AWK-3191 and is the answer not in the manual?

Questions and answers

Related Manuals for Moxa Technologies AWK-3191

Summary of Contents for Moxa Technologies AWK-3191

  • Page 1: Quick Installation Guide

    AWK-3191 Quick Installation Guide Moxa Airworks Edition 2.0, June 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Moxa China (Shanghai office): Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: 1-714-528-6777 Tel: +86-21-5258-9955 Fax: 1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe: Moxa Asia-Pacific: Tel: +49-89-3 70 03 99-0...

  • Page 2: Package Checklist

    Overview The AWK-3191 900 MHz radio is Moxa’s answer to the need for long distance wireless communication for industrial applications. By combining the characteristics of the 33-centimeter band, and the proven 802.11 standard, Moxa is able to provide a reliable long distance wireless solution.
  • Page 3 Step 5: Select the operation mode for the AWK-3191 By default, the AWK-3191’s operation mode is set to AP. You can change the setting in Wireless Settings  Basic Wireless Settings if you would like to use Client mode.

  • Page 4: Panel Layout Of The Awk-3191

    Panel Layout of the AWK-3191 1. Grounding screw 2. Terminal block for PWR1, PWR2, relay, DI1, and DI2 3. Reset button 4. PWR1, PWR2, PoE (discontinued starting with HW Rev 2.0.0), FAULT, and STATE LEDs 5. LEDs for signal strength 6.

  • Page 5: Mounting Dimensions

    The aluminum DIN-rail attachment plate should be fixed to the back panel of the AWK-3191 when you take it out of the box. If you need to reattach the DIN-rail attachment plate to the AWK-3191, make sure the stiff metal...

  • Page 6: Wall Mounting (Optional)

    STEP 2: Mounting the AWK-3191 to a wall requires 4 screws. Use the AWK-3191 device, with wall mount plates attached as a guide, to mark the correct locations of the 4 screws. The heads of the screws should be less than 6.0 mm in diameter, and the shafts should be less...

  • Page 7: Wiring Requirements

    WARNING Safety First! Be sure to disconnect the power cord before installing and/or wiring your Moxa AWK-3191. Calculate the maximum possible current in each power wire and common wire. Observe all electrical codes dictating the maximum current allowed for each wire size. If the current goes above the maximum ratings, the wiring could overheat, causing serious damage to your equipment.

  • Page 8: Grounding The Moxa Awk-3191

    Grounding the Moxa AWK-3191 Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground connection from the ground screw to the grounding surface prior to connecting devices.

  • Page 9: Wiring The Redundant Power Inputs

    Wiring the Redundant Power Inputs The top two pairs of contacts of the 10-contact terminal block connector on the AWK-3191’s top panel are used for the AWK-3191’s two DC inputs. Top and front views of the terminal block connector are shown here.

  • Page 10: Cable Holder Installation (Optional)

    Cable Holder Installation (Optional) Attach the cable holder to the bottom of the AWK-3191 to help keep cables neat and avoid accidents that result from untidy cables. STEP 1: Screw the cable holder onto the bottom of the AWK-3191. STEP 2: After mounting the AWK-3191 and plugging in the LAN cable, tighten the cable along the device and wall.

  • Page 11: Led Indicators

    (and ports) are typically not labeled on the connector (or port). Refer to the pinout diagram above for details. LED Indicators The front panel of the Moxa AWK-3191 contains several LED indicators. The function of each LED is described in the table below. Color State...

  • Page 12: Specifications

    System boot up failure SIGNAL Signal level(for Client/Slave mode Green (5 LEDs) only) WLAN function is in wireless-bridge (master/slave) mode. BRIDGE Green WLAN is not in wireless-bridge (master/slave) mode. WLAN function is in client/slave mode and the AWK has established a link with an AP.

  • Page 13: Physical Characteristics

    RX Sensitivity • -90 dBm @ 6 Mbps • -88 dBm @ 9 Mbps • -87 dBm @ 12 Mbps • -85dBm @ 18 Mbps • -81 dBm @ 24 Mbps • -77 dBm @ 36 Mbps • -73 dBm @ 48 Mbps •...
  • Page 14 Details See www.moxa.com/support/warranty.aspx ATTENTION The AWK-3191 is NOT a portable mobile device and should be located at least 20 cm away from the human body. The AWK-3191 is NOT designed for the general public. A well-trained technician is required to deploy the AWK-3191 units and safely establish a wireless network.

Table of Contents