Preface; Introduction; Document Layout - Microchip Technology MCP37X10-200 User Manual

All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a "DS" number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
"DSXXXXXXXXA", where "XXXXXXXX" is the document number and "A" is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
Select the Help menu, and then Topics to open a list of available online help files.

INTRODUCTION

This chapter contains general information that will be useful to know before using the
MCP37X10-200 12-Bit Single-Channel Evaluation Kit. Items discussed in this chapter
include:

• Document Layout

• Conventions Used in this Guide
• Recommended Reading
• The Microchip Website
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the MCP37X10-200 12-Bit Single-Channel
Evaluation Kit to demonstrate the performance of the MCP37X10-200 device family.
The manual layout is as follows:
• Chapter 1. "Product Overview"
MCP37X10-200 12-Bit Single-Channel Evaluation Kit.
• Chapter 2. "Installation and Operation"
started with the MCP37X10-200 12-Bit Single-Channel Evaluation Kit.
• Appendix A. "Schematics and Layouts"
the complete Schematics and Layouts.
• Appendix B. "Bill of Materials (BOM)"
complete Bill of Materials.
 2016 Microchip Technology Inc.
MCP37X10-200 12-BIT SINGLE-CHANNEL
EVALUATION KIT USER'S GUIDE

Preface

NOTICE TO CUSTOMERS
– Important information about the
®
IDE online help.
– Includes instructions on how to get
– Refer to the board's web page for
– Refer to the board's web page for the
DS50002511A-page 5