Generac Power Systems H-100 Technical Manual page 47

Number Default Function Name
103 CHCK V PHS ROT
104 CHCK C PHS ROT
105 FAULT RLY ACTIVE
106 USR CONFIG 106
107 INT EXERCISE ACT
108 CHECK FOR ILC
109 USR CONFIG 109
110 USR CONFIG 110
111 USR CONFIG 111
112 USR CONFIG 112
113 USR CONFIG 113
114 USR CONFIG 114
115 USR CONFIG 115
116 USR CONFIG 116
117 USR CONFIG 117
118 USR CONFIG 118
119 USR CONFIG 119
120 USR CONFIG 120
H-100 Control Panel Technical Manual
Function Description
Detected voltage phase rotation as not being A-B-C
Detected current phase rotation as not being A-B-C and not matching voltage
Audible alarm/warning signal is active.
GenLink controlled: GenLink front panel radio button selected
Internal Exercise is active – includes QuietTest®
Indicates the ILC is not running
Available for ILC use
Available for ILC use
Available for ILC use
Available for ILC use
Available for ILC use
Available for ILC use
Available for ILC use
Available for ILC use
Available for ILC use
Available for ILC use
Available for ILC use
Available for ILC use
Appendix B
45