H-100 Digital Output Functions - Generac Power Systems H-100 Technical Manual

Appendix B
H-100 Control Panel Technical Manual

H-100 DIGITAL OUTPUT FUNCTIONS

Number Default Function Name
1 COMMON ALARM
2 COMMON WARNING
3 GEN RUNNING
4 ALARMS ENABLED
5 READY FOR LOAD
6 GEN READY TO RUN
7 GEN STOPPED-ALRM
8 GEN STOPPED
9 GEN IN MANUAL
10 GEN IN AUTO
11 GEN IN OFF
12 OVERCRANK ALARM
13 OIL INHIBIT ALRM
14 ANNUNC SPR LIGHT
15 OIL TEMP HI ALRM
16 OIL TEMP LO ALRM
17 OIL TEMP HI WARN
18 OIL TEMP LO WARN
19 OIL TEMP FAULT
20 COOL TMP HI ALRM
21 COOL TMP LO ALRM
22 COOL TMP HI WARN
23 COOL TMP LO WARN
24 COOL TMP FAULT
25 OIL PRES HI ALRM
26 OIL PRES LO ALRM
27 OIL PRES HI WARN
28 OIL PRES LO WARN
29 OIL PRES FAULT
30 COOL LVL HI ALRM
31 COOL LVL LO ALRM
32 COOL LVL HI WARN
33 COOL LVL LO WARN
34 COOL LVL FAULT
35 ANALOG 5 HI ALRM
FUEL LVL HI ALRM
36 ANALOG 5 LO ALRM
FUEL LVL LO ALRM
37 ANALOG 5 HI WARN
FUEL LVL HI WARN
38 ANALOG 5 LO WARN
FUEL LVL LO WARN
39 ANALOG 5 FAULT
FUEL LVL FAULT
40 ANALOG 6 HI ALRM
FUEL PRS HI ALRM
INLT TMP HI ALRM
41 ANALOG 6 LO ALRM
FUEL PRS LO ALRM
INLT TMP LO ALRM
42
Function Description
An alarm is active
A warning is active
Generator is running
All alarm hold off delays have expired, so all alarms are enabled
Generator is warmed up and ready to accept power loading
Generator is ready to start
Generator stopped due to a shutdown alarm
Generator is stopped
Generator in MANUAL mode ( key switch in MANUAL or ILC overriden)
Generator in AUTO mode ( key switch in AUTO or ILC overriden )
Generator in OFF mode ( key switch in OFF or ILC overriden )
Generator has unsuccessfully tried to start the designated number of times
Oil pressure too high for a stopped engine
ILC controlled: this function operates the spare remote annunciator light
Oil Temperature has gone above maximum alarm limit
Oil Temperature has gone below minimum alarm limit
Oil Temperature has gone above maximum warning limit
Oil Temperature has gone below maximum warning limit
Oil Temperature sensor exceeds nominal limits for valid sensor reading
Coolant Temperature has gone above maximum alarm limit
Coolant Temperature has gone below minimum alarm limit
Coolant Temperature has gone above maximum warning limit
Coolant Temperature has gone below maximum warning limit
Coolant Temperature sensor exceeds nominal limits for valid sensor reading
Oil Pressure has gone above maximum alarm limit
Oil Pressure has gone below minimum alarm limit
Oil Pressure has gone above maximum warning limit
Oil Pressure has gone below maximum warning limit
Oil Pressure sensor exceeds nominal limits for valid sensor reading
Coolant Level has gone above maximum alarm limit
Coolant Level has gone below minimum alarm limit
Coolant Level has gone above maximum warning limit
Coolant Level has gone below maximum warning limit
Coolant Level sensor exceeds nominal limits for valid sensor reading
Analog Input #5 has gone above maximum alarm limit
Fuel Level
Analog Input #5 has gone below minimum alarm limit
Fuel Level
Analog Input #5 has gone above maximum warning limit
Fuel Level
Analog Input #5 has gone below maximum warning limit
Fuel Level
Analog Input #5 sensor exceeds nominal limits for valid sensor reading
Fuel Level
Analog Input #6 has gone above maximum alarm limit
Fuel Pressure
Inlet Air Temperature
Analog Input #6 has gone below minimum alarm limit
Fuel Pressure
Inlet Air Temperature