Loading, Storing, And Running Methods From The Software Keypad; To Load A Method; To Store A Method; To Manually Inject A Sample With A Syringe And Start A Run - Agilent Technologies 7820A Operating Manual

4
Running a Method or a Sequence from the Software Keypad

Loading, Storing, and Running Methods from the Software Keypad

To load a method

To store a method

To manually inject a sample with a syringe and start a run

To run a method to process a single ALS sample

48
Press [Load].
1
Press [Method].
2
3 Enter the number of the method to be loaded (1 through
9).
Press [On/Yes] to load the method and replace the active
4
method. Alternatively, press [Off/No] to return to the
stored methods list without loading the method.
1 Ensure that the proper parameters are set.
2 Press [Store].
Press [Method].
3
Enter the number of the method to store (1 through 9).
4
Press [On/Yes] to store the method and replace the active
5
method. Alternatively, press [Off/No] to return to the
stored methods list without storing the method.
1 Prepare the sample syringe for injection.
2 Load the desired method. (See
Press [Prep Run].
3
Wait for STATUS Ready for Injection to be displayed.
4
5 Insert the syringe needle into the inlet and puncture the
septum.
Simultaneously depress the syringe plunger to inject the
6
sample and press [Start].
1 Prepare the sample for injection.
2 Load the sample vial into the assigned location in the
ALS turret.
Load the desired method. (See
3
Press [Start] on the GC keypad to initiate the ALS syringe
4
cleaning, sample loading, and sample injection method.
"To load a method".)
"To load a method".)
Operating Guide