About Logs - Agilent Technologies 7820A Operating Manual

About Logs

Run log
System event log
Operating Guide
Two logs are accessible from the keypad: the run log and the
system event log. To access the logs, press [Logs] to toggle to
the desired log. The display will indicate the number of
entries the log contains. Scroll through the list.
The run log is cleared at the start of each new run. During
the run, any deviations from the planned method (including
keypad intervention) are listed in the run log table. When
the run log contains entries, the Run Log indicator lights.
The system event log records significant events during the
GC's operation. Some of the events also appear in the run
log if they are in effect during a run.
Software Keypad Operation
3
45