Keyboard And Display - Agilent Technologies 7697A Advanced Operation Manual

6
Options

Keyboard and Display

84
The HS provides the keyboard options listed in
below.
Table 14 Keyboard and display options
Parameter
Keyboard lock
Hard Configuration lock
Key click
Warning beep
Method modified beep
Pressure units
Language
Radix type
Display saver
Comments
When locked, a local user can use the keyboard to
start or stop a sequence, or enter a priority sample
(standalone use), but cannot edit method setpoints
or sequences.
On prevents keyboard hardware configuration
changes (such as installing a new EPC module); Off
removes lock.
Click sound when keys are pressed.
Allows you to hear warning beeps.
Turn on for high pitched beep when a method
setpoint is modified.
Press [Mode/Type] to select the desired pressure
units for the display:
•
psi: pounds per square inch, lb/in
•
bar: absolute unit of pressure, dyne/cm
•
kPa: mks unit of pressure, 10
Select [Mode/Type] to choose the display lan-
guage: English or Chinese ( 中文 ).
Press [Mode/Type] to select the radix type. Note
that some data systems may require a particular
radix, regardless of locale. Match the radix used in
the data system for best results.
Select On or Off. When on, the display dims after a
period of inactivity.
Table 14
2
2
3 2
N/m
Advanced Operation