Factorydefaultsettingsforalarms - Microsemi SyncServer S300 User Manual

PTP Leap 59: Leap second deletion is pending. The last minute of the day will have 59
seconds.
PTP Leap 61: Leap second insertion is pending. The last minute of the day will have 61
seconds.
PTP Clock Accuracy: The system is not locked to a reference source and is not within the hol-
dover specifications. The PTP Clock Class is 52.
PTP Queue Reset: A PTP queue has filled up and was flushed.
PTP Daemon Reinit: The PTP daemon was overloaded and reinitialized.

FactoryDefaultSettingsforAlarms

Name
NTP System Peer Change
NTP Stratum Change
NTP Leap Change
System Network
System Upgrade
System Config Change
System Health
System Up/Down
System Authentication
Timing No Source
1
Timing GPS Source
Timing Timecode Source
Timing PPS Source
Timing 10MHz Source
Timing GPS Antenna Short
Timing GPS Antenna Open
Timing Oscillator DAC Range
Timing Rubidium Lock
Timing Oscillator Unlock
Timing Source Change
Timing Source Lower Accuracy Input
Timing PLL Unlock
Timing Quality 1e-6
Timing Quality 1e-5
Timing Quality 1e-4
Timing Quality 1e-3
1
The SyncServer S350i does not include a GPS receiver.
997-01520-02 Rev.
Auto
Clear
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
F1..........................................................................
ADMIN - Alarms
Send Write
Severity
Trap Log
Notify
Major Y
Notify
Notify
Minor Y
Notify
Major Y
Minor Y
Notify
Major Y
Major Y
Notify
Notify
Notify
Major Y
Major Y
Notify
Notify
Notify
Notify
Notify
Notify
Notify
Notify
Notify
Notify
Page 89
Send
Email
Y
Y Y
Y
Y
Y Y
Y
Y Y
Y Y
Y
Y Y
Y Y
Y
Y
Y
Y Y
Y Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y