Main Assembly 9; Belt Tension Spring Assembly - Epson TM-U200 Series Technical Manual

C o n fid e n tia l

Main Assembly 9

Belt tension spring assembly

1. Hook the belt tension spring to the hooks on the tension plate assembly and paper feed
frame assembly.
2. Push the carriage motor assembly in the direction of the arrow to make sure the motor is
properly placed. Then attach the belt tension fixing plate and the screw.
Be careful not to move the tension plate assembly when securing the screw.
Tension plate
assembly's hook
5-24 Disassembly, Assembly, and Adjustment
Carriage motor assembly
Belt tension spring
CPS-tite (S-P4) (M3x8)
[0.69 to 0.88 N • m
(7 to 9 kgf •cm)]
Belt tension fixing plate
Paper feed frame
assembly's hook
Rev. A