Epson TM-U200 Series Technical Manual page 154

C o n fid e n tia l
8. Secure the auto cutter assembly to the cutter plate assembly with screw. In doing so, there
should not been gap between rightmost of auto cutter assembly and cutter plate.
CBS-tite (M3x4)
(0.59 to 0.78 N • m (6 to 8 kgf • cm)]
9. Align the auto-cutter plate assembly with the holes of the auto-cutter fixing plate.
10. Attach the auto-cutter plate assembly to the auto-cutter fixing plate. Make sure the holes for
the shafts of the auto-cutter plate assembly match the holes in the auto-cutter fixing plate.
Insert the hook end of the spring in the hole in the auto-cutter plate assembly first, and the
5-44 Disassembly, Assembly, and Adjustment
Auto-cutter assembly
Auto-cutter plate assembly
Rev. A